Reeds 'n Stuff/Bassoon/Reed Making Machines/Gouging Machine/Accessories products

Blade Resharpening from 57.63 €

Wed, 04 Feb 2026 08:50:22 +0100

How to Order a Resharpening

Order

Order the amount of your blunt blades on our webshop.
Send

Send your blades to:

Reeds 'n Stuff GmbH
Karlsbader Strasse 88 c
09465 Cranzahl
Germany

Please include a copy of your order or note your order number.

Please note that import charges will be added by the shipping service provider if you have not indicated on the customs document the contents of the shipment or if the amount was stated too high.
Receive

After we received your blades we will resharpe and return them to the given delivery address.

Transport Bag 106.70 €

Thu, 05 Mar 2026 13:21:10 +0100

Profiling Machine To Go

The Reeds 'n Stuff transport bag for your bassoon/contrabassoon profiling machine combines a simple design with practical functionality and ease of use.

This bag allows you to carry the spindle as well as the conversion kit for bassoon and contrabassoon. This ensures that you always have all the essential machine parts at hand and can adjust your reeds as needed.

The foam interior securely holds your profiling machine and its components in place. The three-sided zipper allows for easy opening and closing of the bag, as well as simple insertion and removal of your machine. Additionally, the top compartment offers space for tools and other essentials.

Take your profiling machine safely wherever you go!

Handle 15.07 €

Thu, 05 Mar 2026 13:23:23 +0100

Analog Dial Indicator 261.80 €

Wed, 21 Jan 2026 12:45:12 +0100

Quality and Control

Precision, durability, and reliability characterize Reeds 'n Stuff dial indicators.

Achieve consistently good results by measuring the thickness of your cane.
The markings on the tongue help to determine identical measuring points between reeds, which allows you to check the profile and symmetry of the reeds.

The dial and the lifting lever can be rotated to any desired position.
The dial indicator is therefore suitable for both right-handed and left-handed people.

Our dial indicators are available in both analog or digital formats.
The precision of both devices is the identical, the only difference lies in the convenience of use.

New

Curved

The newly designed tongue is slightly curved.
This enables precise measurement results along the entire blade.

New

Highly Accurate

The new side contour at the tip of the tongue tapers towards the front to allow pinpoint measurements on the sides of the tube.

For Upgrading

The new tongue is also available separately so it can be installed in your dial indicator.

Buy

Swap It Out

Learn how to do so on the Support page.

The Tip of Your Choice

Choose among tips S (Standard for bassoon and the mini dial indicator), F, and D to see the point you are measuring from every perspective and to measure exactly at a given point. Choose the ball-pointed tip K for a smooth glide when you pull the cane or reed through, as well as to measure gouged cane.

The Reeds 'n Stuff transport case features a simple design that's easy to use. The foam interior provides a snug fit for safe transportation. Tools can be stored in the zippered compartment on top of the case. The handle provides portability wherever you need it.

Buy

How can I set the dial indicator to ZERO?

The easiest way is to turn the dial so that the large pointer is back at ZERO. However, the dial indicator can also be recalibrated so that the large pointer is back at 12 o'clock. To do this, loosen the fastening screw that fixes the dial indicator in the dial indicator arm. Now position the dial indicator by moving it up or down so that both the small and large pointer show ZERO. When locking the screw do not tighten it too much, as this can block the axle movement in the dial indicator.

Can I change the tip of the dial indicator?

Replacing the tip of the dial indicator is easy to do. You can simply turn out the tip that you have now with the help of pliers and replace it with the desired new tip. If there is not enough space between the tongue and the tip, you can loosen the screw that fixes the dial gauge in the dial gauge arm and remove the dial gauge from the arm. It may now be necessary to recalibrate the dial indicator.

Can I change the tongue of the dial indicator?

The tongue of the dial gauge can also be changed very easily. You can find instructions here.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured with the hardness tester. Inaccurate measurement results may occur also with gouged cane. For this reasons we do not recommend using the hardness tester as a dial indicator.

Can I transform my dial indicator from right to left-handed or do I need to buy a new one?

The dial indicator can easily be transformed from right to left-handed. Simply loosen the set screw at the end of the arm holding the dial. This will allow you to rotate the dial to face the opposite direction. Be sure to calibrate the height of the dial so it both touches the tongue and reads "0" before tightening the set screw. Make sure not over-tighten this screw as it will damage the actuating shaft and prevent the dial from operating properly.

Radius Dial Indicator 200.87 €

Thu, 05 Mar 2026 13:22:53 +0100

Precision right from the start

Precise pre-selection through measurement of the cane diameter is an important prerequisite for consistent gouging results.

With our radius dial indicator you can determine the diameter of your tube cane for bassoon, contra bassoon, baroque bassoon, clarinet and pipe precisely and quickly. This way you can easily identify cane which will fit exactly to the diameter of your gouging machine.
Suitable for diameters from 16 to 37 mm.

The radius dial indicator is available both as a hand-held device
or mounted on a base plate.

Radius Dial Indicator 276.13 €

Thu, 05 Mar 2026 13:22:53 +0100

Precision right from the start

Precise pre-selection through measurement of the cane diameter is an important prerequisite for consistent gouging results.

The radius dial indicator is available both as a hand-held device
or mounted on a base plate.

Diameter Gauge 22–32 48.04 €

Thu, 05 Mar 2026 13:21:15 +0100

Size it up

The Reeds 'n Stuff bassoon and contra bassoon
diameter gauge allows you to check the diameter of the cane.
Sort your cane by size and ensure consistency.

Diameter measurement from 22-32 mm are provided in increments of 0.5 mm.

Digital Dial Indicator 440.30 €

Mon, 23 Feb 2026 20:25:56 +0100

Quality and Control

Precision, durability, and reliability characterize Reeds 'n Stuff dial indicators.

The dial and the lifting lever can be rotated to any desired position.
The dial indicator is therefore suitable for both right-handed and left-handed people.

Our dial indicators are available in both analog or digital formats.
The precision of both devices is the identical, the only difference lies in the convenience of use.

New

Curved

The newly designed tongue is slightly curved.
This enables precise measurement results along the entire blade.

New

Highly Accurate

The new side contour at the tip of the tongue tapers towards the front to allow pinpoint measurements on the sides of the tube.

For Upgrading

The new tongue is also available separately so it can be installed in your dial indicator.

Buy

Swap It Out

Learn how to do so on the Support page.

The Tip of Your Choice

Buy

Can I change the tip of the dial indicator?

Can I change the tongue of the dial indicator?

The tongue of the dial gauge can also be changed very easily. You can find instructions here.

Can the hardness tester be used as a dial indicator?

Can I transform my dial indicator from right to left-handed or do I need to buy a new one?

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Do not touch the new battery with your fingers, use a piece of cloth. The battery compartment is located on the upper left side of the dial gauge. Use a small screwdriver or the tip of a sharp knife to lift off the small plastic cover. Insert the new battery exactly as you found the old one. When inserting the new battery be careful not to touch, bend, or break the battery contacts (the small pieces of metal inside the dial gauge).
You can find detailed instructions here.

Spare Blade 172.28 €

Fri, 27 Feb 2026 13:02:18 +0100

for Bassoon & Contrabassoon Gouging Machine

Reeds 'n Stuff/Bassoon/Reed Making Machines/Gouging Machine/Accessories products

Blade Resharpening from 57.63 €

How to Order a Resharpening

Order

Send

Receive

FAQ

Transport Bag 106.70 €

Profiling Machine To Go

Handle 15.07 €

Analog Dial Indicator 261.80 €

Quality and Control

Curved

Highly Accurate

For Upgrading

Swap It Out

The Tip of Your Choice

FAQ

Radius Dial Indicator 200.87 €

Precision right from the start

Radius Dial Indicator 276.13 €

Precision right from the start

Diameter Gauge 22–32 48.04 €

Size it up

Digital Dial Indicator 440.30 €

Quality and Control

Curved

Highly Accurate

For Upgrading

Swap It Out

The Tip of Your Choice

FAQ

Spare Blade 172.28 €