Reeds 'n Stuff/Gift Ideas/For Bassoon products

Tool Bag R'S COMPACT 66.64 €

Thu, 05 Mar 2026 13:21:23 +0100

Secure, Compact, Stylish

Our compact tool bag allows you to store your reed-making tools with ease. The smaller size is perfectly suited for our Compact Tool Series. Our mini dial indicators for Bassoon and Oboe also fit securely inside and can be transported safely.

Inside the bag, various elastic loops are available to hold your tools in place. Of course, you may also carry your tools loosely if preferred. Smaller parts can be stored in the separate inner pocket. Scraping tongues, tubes, and other small items can be safely kept in the outer pocket with zipper closure.

A special highlight is the additional strap, which allows the tool bag to be attached to backpacks or suitcases or simply worn comfortably over the shoulder.

The exterior is made of durable, hard-wearing nylon, while the interior is lined with robust cowhide leather.

Cookie Cutter Bassoon Reed 6.50 €

Tue, 03 Mar 2026 07:03:53 +0100

Reeds for Every Taste

Making reeds in large batches has never been easier.

The R'S cookie cutters are made of stainless steel, making them both food and dishwasher safe. Roll out a sheet of dough and enjoy making reeds
in a whole new way.

Ejector Ring 14.10 €

Thu, 05 Mar 2026 13:21:16 +0100

Eject

The ejector ring for bassoon reeds is used to easily detach the reed from the mandrel after the wire has been fixed. In addition, by using an ejector ring you avoid twisting the reed when pulling it off the mandrel, which would otherwise lead to undesired blade slippage.

Due to it's unique design, the ejector ring can be set to any desired position on the mandrel.

The ejector ring fits on all mandrels with a maximum diameter of 6 mm, and can also be used as a depth stop on our spiral-fluted and diamond-coated reamers.
We also have a model of the Ejector Ring for Contrabassoon Mandrels.

- Use the Ejector Ring as a depth stop, so that your reeds are always formed the same way and you do not have to remember how far above or below the line you form your reeds.
- Turn the silver portion of the Ejector Ring to begin pushing your reed off the mandrel.
- Using the Ejector Ring allows you to easily remove the reed without twisting the tube and causing blade slippage.
- Using the included hex key you can adjust the position of the Ejector Ring to any position on the forming mandrel you desire.
- The Ejector Ring can also be used as a depth stop on the spiral reamer, allowing for a consistent final diameter when reaming the inside of the tube.
- Similarly, the Ejector Ring can be used as a depth stop on the diamond reamer, providing consistency from reed to reed.

Tip Opener HANNEVOLD 27.27 €

Thu, 05 Mar 2026 13:21:16 +0100

Back to Beginnings

This mandrel is designed to return the tip opening to its original dimensions. It was created in cooperation with Per Hannevold and his teacher Harold Goltzer.

- Reeds often lose their inner curvature, becoming flatter and closing down over time.
- This mandrel works by bypassing the tube and opening the space between the blades of the reed from the inside.
- This allows you to open up the inside of the reed again without the need for drastic adjustments with pliers.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Forming Mandrel US 24.89 €

Thu, 05 Mar 2026 13:21:16 +0100

Inspired by a Master

This forming mandrel is inspired by the forming mandrels designed by Don Christlieb. This new version, similar to the original design, pairs perfectly with the Herzberg shape but works equally well with most shapes.

The mandrel includes several engraved lines: one which marks a recommended position for forming the tube, and one which marks a recommended position after beveling. The mandrel has also been extended to include a third line for contrabassoon reeds.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Interchangeable Forming Mandrel US 7.00 €

Thu, 05 Mar 2026 13:21:16 +0100

Inspired by a Master

Elegantly flexible

Our modular mandrel system offers full flexibility with an elegant, space-saving design. The interchangeable mandrels match our standard ones but include added benefits. Multiple handle styles with a shared vice grip insert let you use them like any other mandrel. After forming, the mandrels can be placed directly into the wood drying board base – keeping the reed on the mandrel throughout for optimal control of the tube’s shape.

You can use multiple mandrel types with a single handle, minimizing clutter.

Our modular mandrel system now also includes our reamers.

Forming Mandrel US COMPACT 24.89 €

Thu, 05 Mar 2026 13:21:16 +0100

Inspired by a Master

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Diameter Gauge 22–32 48.04 €

Thu, 05 Mar 2026 13:21:15 +0100

Size it up

The Reeds 'n Stuff bassoon and contra bassoon
diameter gauge allows you to check the diameter of the cane.
Sort your cane by size and ensure consistency.

Diameter measurement from 22-32 mm are provided in increments of 0.5 mm.

Straight Shaper R20 220.15 €

Thu, 05 Mar 2026 13:21:19 +0100

Especially suitable for French Basson

Durable & Precise

Our Straight Shapers are made from carefully selected materials and finely finished. Through a hardness treatment tailored to their size and intended use, they offer high shape stability, precision, and durability. This ensures comfortable and controlled operation, consistently delivering precise results.

The pair of engraved lines on the sides mark the narrowest point of the shape and are an important tool for precise shaping. For optimal shape transfer, shape from both sides towards this narrowest point.

The outermost lines are to help center shorter cane (118 mm for bassoon, 148 mm for contrabassoon).

Thanks to the silicone tips, both gouged and profiled cane can be shaped.
The silicone tips secure the thinner parts of the profiled cane in the center and prevent the cane from slipping.

The silicone tips can be removed and replaced as desired, especially when shaping unprofiled cane.

Variety of Shapes

Our range of handheld pattern cutters impresses with an extraordinary variety of shapes. From classic profiles to custom special shapes, the different contours and designs provide precise results and maximum creative freedom.

View all handheld pattern cutters

Anti-Crack-Mandrel 24.89 €

Thu, 05 Mar 2026 13:21:21 +0100

No more cracked blades

Gone are the days of inserting your forming mandrel all the way into the shaft to round the back end of your reed.

The Anti-Crack Mandrel allows you for form only the back of the shaft while keeping the throat flat. This prevents cracks from spreading into the blade.

This enables you to then gently open the throat of the reed only the desired amount with your forming mandrel of choice.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Reed Making Pliers 36.75 €

Thu, 05 Mar 2026 13:21:20 +0100

Comfort and control

With its lightness and comfortably coated handles
this tool fits well in the hand.
The ergonomic grip with springs makes for effortless work.
The hardened cutting surfaces and the box joint
guarantee exceptional durability.

Made in Germany. 3-year warranty.

- The shaft is specially made with
  an oval opening and smooth inner surfaces.
  
  With the pliers’ slender tips,
  you’ll be able to find the perfect position
  between the second and third wires.
- The hardened cutting surfaces are made
  according to DIN ISO 5746 standards
  to be particularly robust.
- The specially formed grip surfaces
  make it easy to grasp and twist wire.
- The high-quality workmanship
  and design even allow you to
  grip materials like thread.
- Our pliers feature a box joint,
  meaning that one handle is guided
  through the other on both sides.
  This ensures that the cutting edges will
  remain precisely aligned even
  after years of use.

Reed Making Knife 86.72 €

Tue, 17 Feb 2026 08:35:13 +0100

A cut above the rest

Distinctive design paired with outstanding cutting and shaving capabilities put Reeds 'n Stuff knives above the rest.

Simply put, you cannot make a good reed without a good knife.
This blade keeps its edge cut after cut, and the hardened specialty steel will sharpen nicely when needed.

These qualities make our knives the first choice for musicians.

Reed Making Set STUDENT from 245.58 €

Fri, 20 Feb 2026 17:49:59 +0100

The Standard

Our medium-sized reed making set contains all the tools you will need to get started building your own reeds by hand. Benefit from our high-quality product selection so that you can begin your journey to self-employment, too.

Form the blanks with our Anti-Crack and Forming Mandrels, fit the tube to your bocal with the Spiral and Diamond Reamers, and adjust your reeds with the file and knife. Use the holding mandrel and the pliers to keep your hands safe and ensure maximum control.

Note: Only the Reed Making Set STARTER contains a knife. We have included our ceramic folding knife as it is lightweight, low-cost, and does not require sharpening. The upgraded sets do not contain a knife as there are many options from which to choose. We have provided a list of the available knives with the upgraded sets, to help you easily add one to your set of choice.

More Information

Forming Mandrel 27.27 €

Thu, 05 Mar 2026 13:21:16 +0100

Well Formed

The parabolic forming mandrel for contra bassoon reeds is newly designed to meet your reed making needs. Several crucial measurements were taken from a host of contra bassoon reeds in the most popular shapes to provide key thicknesses at the back of the reed as well as throughout the tube.

The tip of the mandrel is less than 2 mm wide - small enough to fit between the pieces of cane after folding and help open up the tube. Use one mandrel to form the tubes from start to finish.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Reamer COMPACT - Diamond 61.67 €

Thu, 05 Mar 2026 13:21:23 +0100

Compact

Our compact series of reamers is exactly the same as our full size reamers, but with a smaller handle.

This smaller handle is designed for musicians who travel a lot, have smaller hands, or are just looking for a smaller handle on their reed making tools. It offers space savings while still providing enough handle to have a solid grip on the tool.

Diamond Coated

Our mandrels and reamers complete the process of fitting the reed precisely to the bocal. The matching parabolic taper of the mandrel and reamer allows for precise fitting of reeds on the instrument, as well as the proper volume inside the reed.

The multi-fluted Spiral Reamer cuts very easily and the Diamond Reamer finishes the inside perfectly.

Use the Reed Tool Brush to keep your tools clean and prolong their longevity.

Ergonomic

The ergonomic wooden handle of our reed making tools provides
for ease of use and is made of oiled beechwood.

Tip Profiler from 1,773.10 €

Tue, 03 Mar 2026 23:10:15 +0100

Easy and Efficient

The tip profiling machine is the most efficient machine
for creating the profile in the front half of the reed.

This machine allows you to precisely produce a symmetrical and playable reed,
using our many available templates.

Built of high-quality anodized aluminum and a special german steel,
the tip profiling machine is built to last for many years.
Linear ball bearings provide a comfortable user experience.

Blade 360° installed

After years of development, Reeds 'n Stuff is proud to offer the Blade 360°. When the blade becomes dull simply rotate to the next sharp section and continue profiling. This can be done at least 6 times.
The screw holding the blade is easily accessed from the underside, meaning once the height of the blade holder is set, you can set it and forget it.

Prepared for Transport

Prepare your tip profiler for transport.

Insert the mandrel into the designated hole on the left side, screw the wooden handle into the threaded hole on the right side, and lock the carriage into place with the transport locking screw on the left side of the machine.

Transport Bag Included

The Reeds 'n Stuff transport case features a simple design that's easy to use.
The foam interior allows for safe transport and provides a snug fit. The tools to adjust the machine can be stored in the zipper compartment on top of the case. The handle provides portability wherever you need it.

Buy

Test a Template

You can also test a template for 60 days.

How does the trial work?

Template Chart

Reed Stick 30.99 €

Thu, 05 Mar 2026 13:21:23 +0100

The Vandoren reed stick, inspired by a reed rush, is also made of etched glass and enables players to precisely customize and personalize their reeds. The shape of the tip is specially designed for precise scraping.

Hygrocase 160.65 €

Thu, 05 Mar 2026 13:21:50 +0100

Always ready

Like a humidor, this case maintains stable climate conditions.

The newly designed air vent can be adjusted to allow airflow from the outside or to keep the case hermetically sealed. When the air vent is closed, the rubber seal protects your reeds from changing outside conditions. Using the included sponge you can add water to raise the humidity.

With one glance at the hygrometer, you can make informed decisions about how to care for your reeds and keep the humidity under your control.
The acrylic glass can be cleaned easily with a cloth.

With the air vent closed your reeds are protected against changes in the surrounding environment.

The vent can be easily rotated according to your needs, allowing for more or less airflow as needed.

Opening the vent completely allows the reeds to dry out and acclimate to the surrounding climate.

Straight Shaper JESSEN 220.15 €

Thu, 05 Mar 2026 13:21:19 +0100

A Shape for Modern Times

This shape was designed in collaboration with Dana Jessen. Jessen is a bassoonist, improviser, and electroacoustic musician, co-founder of the contemporary reed quintet Splinter Reeds, and Associate Professor of Contemporary Music & Improvisation at the Oberlin Conservatory.

Watch as Dana Jessen explains all the advantages of a wider bassoon shape.

Durable & Precise

The outermost lines are to help center shorter cane (118 mm for bassoon, 148 mm for contrabassoon).

Thanks to the silicone tips, both gouged and profiled cane can be shaped.
The silicone tips secure the thinner parts of the profiled cane in the center and prevent the cane from slipping.

The silicone tips can be removed and replaced as desired, especially when shaping unprofiled cane.

Variety of Shapes

View all handheld pattern cutters

Reed Making Set STARTER 115.69 €

Thu, 05 Mar 2026 13:21:22 +0100

The Basics

This reed making set contains everything the beginning reed maker
will need to learn to how to adjust their reeds.
Benefit from our high-quality product selection
to help get your reed making journey started.

Form the blanks with our ceramic knife and adjust
your reeds with the diamond file and plaque.
Use the holding mandrel and the pliers
to keep your hands safe and ensure maximum control.

More Information

Reed Holder R'S 21.90 €

Thu, 05 Mar 2026 13:22:01 +0100

Always prepared

Switch reeds with speed and ease.

Whether you like to have a spare reed on hand, have that one reed for the big solo, the special high (or low) note reed, or want a safer place to store your reed during long breaks, the R'S Reed Holder is here for you.

Chrome-coated to match your bassoon, this light-weight yet sturdy reed holder can be attached with the included double-sided tape and will securely hold your reed in place. It can also be removed without leaving any marks, leaving your bassoon unblemished.

Reed Soaker R'S 38.98 €

Thu, 05 Mar 2026 13:21:23 +0100

Water Where You Need It

Our newly developed stainless steel reed soaker can be sealed tightly – for safe transport without leaks. Thanks to two magnets, it adheres reliably to any ferromagnetic surface. Ideal for soaking your reeds – whether on the road, on stage, or at home.

Snappy

Simply click the lid into the bottom and attach the reed soaker to your music stand, or simply set it down.

Watertight

A sealing ring ensures that the reed soaker closes securely. To do this, simply click the lid into place. This allows you to take your water with you wherever you go.

Magnetic

The magnets ensure that the reed soaker adheres firmly and securely to the steel parts of the music stand.

Tool Bag R'S 99.96 €

Thu, 05 Mar 2026 13:21:23 +0100

Safe and stylish

The ultimate in flexibility: you can easily store your reed making tools in our handy tool bag. Inside the bag there are various elastic bands for securing your tools. You can also transport your tools loosely in the tool bag.
Smaller items can fit into the separate inner compartment.

You can safely store files, plaques, pencils, and other small parts in the outer compartment of the tool bag using the zipper.

The outside of the tool bag is made of a durable nylon fabric. The inner part is lined with elegant and robust leather.

Pencil with holding magnet 4.09 €

Thu, 05 Mar 2026 13:22:02 +0100

A practical pencil with a holding magnet.
The magnet has a extreme adhesive force and sticks to all music stands with magnetic surfaces.

Suitable for all pencils with a diameter of 6 to 7.5 mm.

Blade Sharpening Jig PRINTS 24.85 €

Thu, 05 Mar 2026 13:21:23 +0100

Never a Dull Blade

The R'S Prints blade sharpening jig makes sharpening your profiling blades easy. Place the blade into the jig, run it over your sharpening stone, and voila - like new.

Set up is simple:
place a piece of paper underneath the wheels, then place the blade so that it is touching the sharpening stone. Tighten the screw and the angle is all set.

Remove the piece of paper then run the jig over the stone several times until you see an even reflective surface on the bottom of the blade. This indicates that the blade has been properly sharpened.

Take the blade off the jig and place the flat side on the sharpening stone. After 3-5 to passes to remove the burr, and the blade is ready to go.

Anti Tarnish Strips 10.78 €

Thu, 05 Mar 2026 13:21:58 +0100

Long-term tarnish protection for silver instruments

The Brillant anti-tarnish strip is a special absorbent paper that neutralizes the sulphur content in the air. This protects metallic instruments and other objects from unwanted tarnishing. Simply place one or more protective strips in the instrument case. To achieve maximum effect, leave the strips exposed or in unclosed containers as little as possible. The strips protect for up to 6 months. The set contains 8 tarnish protection strips.

Please ensure that unused strips are stored in an airtight, cool and dry place to prevent premature consumption. The strips are harmless to health and environmentally friendly. Used strips can be disposed of with household waste in accordance with local official regulations.

drills 1.0 60.99 €

Thu, 05 Mar 2026 13:22:04 +0100

.drills. 1.0 is an established system for bassoon playing that Prof. Ole Kristian Dahl has developed over the last 25 years. The first iteration of this system was the result of his own daily practice, focusing on honing the everyday tools he needed for playing in orchestra. By implementing the system in his teaching for the last 15 years, he has received constant evaluation and feedback from students and professionals. Dahl's students have won over 85 positions in orchestras around the world.

This new fine-tuned edition is the result of this feedback and incorporates a decade of improvements in explanations and exercises. Also includes QR codes linking to video demonstrations.

Table of contents:

Biography
Introduction
Presentation of Drills System
Posture
Breathing
Pressure
Embouchure
Preparation
Digging Out
Intonation
Registers
Slurs
Timing
Half-Hole Technique
Single Tongue
Double Tongue
Vibrato
What is a Drills Day
Mannheim Noodle
Drill No. 1 & Primer
Drill No. 2 & Primer
Coffee Scales
Drill No. 3 & Primer
Flex Exercise
Drills - Example Days

Practice Journal NOTABL_ 32.05 €

Thu, 05 Mar 2026 13:22:02 +0100

Notabl_’s mission is simple: "We all want to live in a world with great music – but to achieve this, the world needs great musicians. Our contribution to this is the development of beautifully designed and user-friendly practice journals that promote education, inspiration, and thoughtful practice."

When you connect pen to paper, you connect more quickly and clearly with your thoughts and intentions. This makes your practice sessions more structured and effective. With many successful days, weeks, and months of practice, you will gradually become the musician you have always wanted to be.

What's in it?
- daily pages and weekly recaps
- room for notes in the back
- the notabl_method explained with examples
- advanced practice tips throughout the journal that musicians at any level can use in their practice
- quotes and facts about classical composers

Ribbon Holder from 6.25 €

Thu, 05 Mar 2026 13:22:59 +0100

You can make your own reed cases with this rubber.

Reed Tip Guillotine 206.17 €

Thu, 05 Mar 2026 13:22:53 +0100

Cut - Perfect

The principles of the Reeds 'n Stuff guillotine guarantee perfect cuts.

Using the millimeter scale, including markings for common bassoon and contrabassoon reed lengths, you can select any length desired.

Reeds with a width of up to 22 mm can be cut with the guillotine.

If needed, the hardened steel cutting unit can be resharpened by us.

Case HEXAGON 42.49 €

Thu, 05 Mar 2026 13:21:53 +0100

Designed with both style and function in mind, the HEXAGON case is the perfect way to store your bassoon reeds securely. The case has been 3D-printed in one piece and the built-in magnets allow it to be effortlessly opened and closed.

New

With our new color variant Pavonina, you receive a unique reed case with shimmering green, blue, and sand tones. Thanks to the three-colored filament, each case is one of a kind.

Strap ZAPPATINI 120.00 €

Wed, 04 Mar 2026 15:07:04 +0100

1985 Gilberto Zappatini’s own unsatisfactory experience with harnesses made him invent the ingenious Zappatini harness. Since then, several thousand Zappatini harnesses have been sold.

The synthesis model is a synthesis of harness and the traditional neck strap. Players can enjoy maximum freedom of movement together with perfect ergonomics.

Synthesis caters to the needs of women players: with this model there is no undue pressure on the breast. Particularly in the case of children and adolescents, whose bodies are still growing, great attention must be paid to posture and an optimum dispersion of the weight of the instrument. With the special kid size, even children can play their instrument intensively without acquiring a health-damaging posture.

Book "The Way of Cane" 41.53 €

Thu, 05 Mar 2026 13:22:04 +0100

A Comprehensive Overview

As the sound-producing mechanism for the bassoon, the reed is a vital component in the sound of the entire instrument. While pre-manufactured reeds are widely available for purchase at music stores, this one-size-fits-all option hardly does justice to the unique needs of the musician and the piece. Many bassoonists, including seasoned professional bassoonist Eric Arbiter, instead choose to craft their own reeds. A nuanced and difficult craft to master, reed-making involves specialized machinery and necessitates special attention to the thickness, and even topography, of the reed itself. When done correctly, however, this process results in a reed that not only produces a more beautiful sound, but also holds up to even the most demanding musical performances.

In The Way of Cane, Arbiter demystifies this process for bassoonists of all levels of experience. Drawing from his decades-long experience as both musician and reed-maker, Arbiter provides a comprehensive yet accessible overview of the craft, from the differing sound qualities produced by changing the dimensions of the reed's blades to the changes in the reed's behaviors as it passes through cycles of wetting and drying during production. Small changes in each of these variables, Arbiter explains, contribute to the ultimate goal of producing a bassoonist's ideal sound. With step-by-step instructions, detailed photos that further illuminate the reed-making process, and a companion website featuring the author's own recordings. The Way of Cane emphasizes the importance of the reed to the bassoon's sound, as well as the harmony between reed and musician.

Ribbon Holder 18.67 €

Thu, 05 Mar 2026 13:22:59 +0100

You can make your own reed cases with this rubber.

Digital Hardness Tester 583.10 €

Thu, 05 Mar 2026 13:22:54 +0100

Quality over Quantity

The characteristics of the cane have a significant influence on the success of our reed making. The appearance of the cane is often deceptive and we quickly learn:
The truth lies beneath the surface.

The hardness tester offers an objective way to judge the quality, not just the quantity of cane. By measuring the hardness of the cane at both ends we are able to discern whether a piece of cane has the same qualities throughout the entire piece. This way we can ensure that the two blades of a reed will vibrate similarly.

Save yourself valuable time and increase the quality of your reed making.
Achieve reliable and repeatable results.

Our hardness testers are available in both analog or digital formats.
The precision of both devices is identical, the only difference lies in the convenience of use.

- The Reeds 'n Stuff transport case features a simple design that's easy to use. The foam interior allows a safe transport and provides a snug fit. Other tools can be stored in the zipper closed compartment on top of the case. The handle gives portability wherever you need it.
  Buy

Why is the hardness tester so important?

First of all, the time saved in selecting suitable canes for you offers a great advantage. You save valuable working time that you would otherwise spend gouging, shaping, tying on and scraping canes that would not have given you a suitable result anyway. More important, however, is the fact that you can increase the quality of your reed making and get more reliable results.

Should the cane be measured dry or soaked?

It should be noted that only sufficiently dried cane will give useful results. It is not advisable to use soaked cane. It is best to note the test results on the cane and later on the staple. This will give you an overview of what works well for you personally.

In what stage should the cane be measured for hardness?

It is best to use the hardness tester after pregouging if you have a pregouging machine. The basic requirement is a smooth surface and a consistent thickness. If you use the small pregouger instead of a machine, you should test the cane after gouging.

Are the measuring results for pregouged cane the same as for gouged cane?

If the material is thicker, the measurement results will be higher.

What are the usual measuring results?

Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).

Are there different measurement results for the hardness testers?

Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.

Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?

Yes, the hardness testers have each been set up for a specific instrument. The heights of the support plate differ. The so-called arbour, on which the cane lies, is available individually, allowing you to convert your machine for other instruments.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured in any case. Also with gouged cane inaccurate measurement results may occur. For this reasons we do not recommend to double the hardness tester as a dial indicator.

What is the difference between the analog and digital hardness tester? Which one is more accurate?

Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analogue hardness tester, the dial has to be turned. The precision of both devices is the same. If required, you can connect the digital hardness tester to your computer to create personal statistics.

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Do not touch the new battery with your fingers, use a piece of cloth. The battery compartment is located on the upper left side of the dial gauge. Use a small screwdriver or the tip of a sharp knife to lift off the small plastic cover. Insert the new battery exactly as you found the old one. When inserting the new battery be careful not to touch, bend, or break the battery contacts (the small pieces of metal inside the dial gauge).
You can find detailed instructions here.

Reed GÜNER from 26.78 €

Tue, 03 Mar 2026 18:51:11 +0100

Güner tube cane grows in the Mediterranean climate of Turkey. The manufacturer of this Reed for Bassoon is an orchestra bassoonist. The high-quality cane is perfect for a well-balanced playing and offers a warm, flexible and round tone. A high percentage of thin fibers of the cane allows the right density for longer lasting reeds.

Instrument Stand 226.10 €

Thu, 05 Mar 2026 13:22:59 +0100

New

Since November 2025 the upper bracket is completely covered with felt to protect your instrument from damage.

This stand, made of robust yet lightweight aluminum, is self-locking and all the contact points are padded with felt.

Once you have folded down the holding arm, only the two feet need to be unfolded.
When you turn the stand right-side-up, the locking mechanism automatically drops down, allowing your instrument to stand securely.

Journal 5.34 €

Thu, 05 Mar 2026 13:22:02 +0100

Record. Compare. Improve. Share.

The R’S Reed Journal is the ideal tool for documenting your reed-making process. Record essential measurements, compare reeds at a glance, and preserve your favorite designs for future use.

– Structured fields for all important data points
– Integrated graph for profile or thickness measurements
– Space for personal notes on playability, tone, response, or whatever unique observations matter to you.

Perfect for students, teachers, and professionals alike - the Reed Journal helps you track, refine, and share your reed-making progress with ease.

Sanding Stick BECO 14.36 €

Tue, 20 Jan 2026 08:57:01 +0100

Leightweight and Precise

The BECO sanding stick is ideal for traveling and perfect for accurately sanding the reeds. Thanks to its compact size and low weight, it fits in any hand baggage. Even security checks at the airport are no problem with this tool.

The sanding stick is supplied with one sanding belt and has a round and a pointed end. This makes it easy to work in hard-to-reach areas. The sharpening belt is tensioned by a spring and held securely in place by the guide groove. This allows is to be turned a little further without any problems when the grain at the tip is used up. Replacing the sanding belt is simple and also done by activating the spring.

Replacement belts are available in packs of 5.

Reed Cleaner 31.20 €

Thu, 05 Mar 2026 13:22:00 +0100

Clean – inside and out

We've all been there: a reed that worked fantastically last week is dull today and doesn't quite vibrate right. Then we look on the inside and it's ... less than clean. We scrape the gunk out of our reeds, but in the process break a corner or cause a split in the tip.

Or we need to try one of our student's reeds, but we're pretty sure they didn't brush their teeth before their lesson and aren't in the mood to have someone else's lunch leftovers in our own instrument.

The Reed Cleaner offers an intuitive way to clean your reeds in seconds, while keeping the reed intact.

Simply place the reed firmly on the Reed Cleaner.

Hold the wide end against the faucet. Turn on the water and watch all the unmentionables inside your reed wash down the drain. Now your reed is ready to go!

Reeds 'n Stuff/Gift Ideas/For Bassoon products

Tool Bag R'S COMPACT 66.64 €

Secure, Compact, Stylish

Cookie Cutter Bassoon Reed 6.50 €

Reeds for Every Taste

Cookie Recipe

Ingredients

Optional for Decoration:

Prepare the Dough:

Form the Cookies:

Bake:

Decoration (optional):

Tip:

Ejector Ring 14.10 €

Eject

Tip Opener HANNEVOLD 27.27 €

Back to Beginnings

Ergonomic

Forming Mandrel US 24.89 €

Inspired by a Master

Ergonomic

Interchangeable Forming Mandrel US 7.00 €

Inspired by a Master

Elegantly flexible

Forming Mandrel US COMPACT 24.89 €

Inspired by a Master

Ergonomic

Diameter Gauge 22–32 48.04 €

Size it up

Straight Shaper R20 220.15 €

Durable & Precise

Variety of Shapes

Anti-Crack-Mandrel 24.89 €

No more cracked blades

Ergonomic

Reed Making Pliers 36.75 €

Comfort and control

Reed Making Knife 86.72 €

A cut above the rest

Reed Making Set STUDENT from 245.58 €

The Standard

Forming Mandrel 27.27 €

Well Formed

Ergonomic

Reamer COMPACT - Diamond 61.67 €

Compact

Diamond Coated

Ergonomic

Tip Profiler from 1,773.10 €

Easy and Efficient

Blade 360° installed

Prepared for Transport

Transport Bag Included

Test a Template

Reed Stick 30.99 €

Hygrocase 160.65 €

Always ready

Straight Shaper JESSEN 220.15 €

A Shape for Modern Times

Durable & Precise

Variety of Shapes

Reed Making Set STARTER 115.69 €

The Basics

Reed Holder R'S 21.90 €

Always prepared

Reed Soaker R'S 38.98 €

Water Where You Need It

Snappy

Watertight

Magnetic

Tool Bag R'S 99.96 €

Safe and stylish

Pencil with holding magnet 4.09 €

Blade Sharpening Jig PRINTS 24.85 €

Never a Dull Blade

FAQ

Anti Tarnish Strips 10.78 €

Long-term tarnish protection for silver instruments

drills 1.0 60.99 €

Practice Journal NOTABL_ 32.05 €