Reeds 'n Stuff/Clarinet/Measuring & Testing products

Diameter Gauge 22–32 48.04 €

Thu, 05 Mar 2026 13:21:15 +0100

Size it up

The Reeds 'n Stuff bassoon and contra bassoon
diameter gauge allows you to check the diameter of the cane.
Sort your cane by size and ensure consistency.

Diameter measurement from 22-32 mm are provided in increments of 0.5 mm.

Radius Dial Indicator 200.87 €

Thu, 05 Mar 2026 13:22:53 +0100

Precision right from the start

Precise pre-selection through measurement of the cane diameter is an important prerequisite for consistent gouging results.

With our radius dial indicator you can determine the diameter of your tube cane for bassoon, contra bassoon, baroque bassoon, clarinet and pipe precisely and quickly. This way you can easily identify cane which will fit exactly to the diameter of your gouging machine.
Suitable for diameters from 16 to 37 mm.

The radius dial indicator is available both as a hand-held device
or mounted on a base plate.

Radius Dial Indicator 276.13 €

Thu, 05 Mar 2026 13:22:53 +0100

Precision right from the start

Precise pre-selection through measurement of the cane diameter is an important prerequisite for consistent gouging results.

The radius dial indicator is available both as a hand-held device
or mounted on a base plate.

Caliper DIGITAL 71.28 €

Thu, 05 Mar 2026 13:21:15 +0100

Digital caliper made of Steel with fixation screw. Easy to take with in a tool pouch. Allows you to switch between inch and millimeter. It comes with a black plastic case.

Compact Caliper 17.85 €

Thu, 05 Mar 2026 13:23:07 +0100

Stainless hardened steel. Accuracy 0,1 mm. With fixation screw and depth gauge.

Pocket Caliper 18.90 €

Thu, 05 Mar 2026 13:23:07 +0100

Brass pocket caliper for measuring staples and reeds.
Indicates millimeters and inches.

Compact Caliper DIGITAL 12.28 €

Thu, 05 Mar 2026 13:23:07 +0100

Made of extra strong carbon fibre composites. Leightweight. Easy to take with in a tool pouch. Allows you to switch between inch and millimeter.

Compact Caliper DIGITAL 23.50 €

Thu, 05 Mar 2026 13:23:07 +0100

Digital caliper made of Steel with fixation screw. Easy to take with in a tool pouch. Allows you to switch between inch and millimeter. It comes with a black plastic case.

Arbour 68.43 €

Wed, 04 Mar 2026 15:05:04 +0100

Here you can purchase a different arbor for the Hardness Tester, thereby converting it between an Oboe or Bassoon or Clarinet or Bagpipe Hardness Tester, without purchasing an entire different unit. A and B are for Clarinet and Saxophone. With type A you will measure at the vamp, whereas type B is for measuring at the flat inside of the reed.

Analog Measuring Device 424.90 €

Thu, 05 Mar 2026 13:23:03 +0100

Control and Quality

Precision, durability and reliability characterize Reeds 'n Stuff measuring devices.

The measuring device allows you to check the thickness and the symmetry of the reed at any given point.
The side plates on the left and right side can be adjusted in increments of 1 mm.
The reed tip plate works in the same manner.
Equipped with scale and positioning pins you can set it in 2 mm steps.

You can get our hardness testers analog or digital.
The precision of both devices is the same, they only differ in the convenience of the reading.

For Clarinet and Saxophone reeds.

Digital Measuring Device 514.01 €

Thu, 05 Mar 2026 13:23:03 +0100

Control and Quality

Precision, durability and reliability characterize Reeds 'n Stuff measuring devices.

You can get our hardness testers analog or digital.
The precision of both devices is the same, they only differ in the convenience of the reading.

For Clarinet and Saxophone reeds.

Analog Hardness Tester 499.80 €

Tue, 01 Oct 2024 17:13:12 +0200

Quality over Quantity

The characteristics of the cane have a significant influence on the success of our reed making. The appearance of the cane is often deceptive and we quickly learn:
The truth lies beneath the surface.

The hardness tester offers an objective way to judge the quality, not just the quantity of cane. By measuring the hardness of the cane at both ends we are able to discern whether a piece of cane has the same qualities throughout the entire piece. This way we can ensure that the two blades of a reed will vibrate similarly.

Save yourself valuable time and increase the quality of your reed making.
Achieve reliable and repeatable results.

Our hardness testers are available in both analog or digital formats.
The precision of both devices is identical, the only difference lies in the convenience of use.

The Arbours A and B are for Clarinet and Saxophone.
With type A you will measure at the vamp, whereas type B is for measuring
at the flat inside of the reed.

- The Reeds 'n Stuff transport case features a simple design that's easy to use. The foam interior allows a safe transport and provides a snug fit. Other tools can be stored in the zipper closed compartment on top of the case. The handle gives portability wherever you need it.
  Buy

Why is the hardness tester so important?

First of all, the time saved in selecting suitable canes for you offers a great advantage. You save valuable working time that you would otherwise spend gouging, shaping, tying on and scraping canes that would not have given you a suitable result anyway. More important, however, is the fact that you can increase the quality of your reed making and get more reliable results.

Should the cane be measured dry or soaked?

It should be noted that only sufficiently dried cane will give useful results. It is not advisable to use soaked cane. It is best to note the test results on the cane and later on the staple. This will give you an overview of what works well for you personally.

In what stage should the cane be measured for hardness?

It is best to use the hardness tester after pregouging if you have a pregouging machine. The basic requirement is a smooth surface and a consistent thickness. If you use the small pregouger instead of a machine, you should test the cane after gouging.

Are the measuring results for pregouged cane the same as for gouged cane?

If the material is thicker, the measurement results will be higher.

What are the usual measuring results?

Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).

Are there different measurement results for the hardness testers?

Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.

Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?

Yes, the hardness testers have each been set up for a specific instrument. The heights of the support plate differ. The so-called arbour, on which the cane lies, is available individually, allowing you to convert your machine for other instruments.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured in any case. Also with gouged cane inaccurate measurement results may occur. For this reasons we do not recommend to double the hardness tester as a dial indicator.

What is the difference between the analog and digital hardness tester? Which one is more accurate?

Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analogue hardness tester, the dial has to be turned. The precision of both devices is the same. If required, you can connect the digital hardness tester to your computer to create personal statistics.

Digital Hardness Tester 583.10 €

Mon, 22 Dec 2025 14:59:27 +0100

Quality over Quantity

Save yourself valuable time and increase the quality of your reed making.
Achieve reliable and repeatable results.

Our hardness testers are available in both analog or digital formats.
The precision of both devices is identical, the only difference lies in the convenience of use.

The Arbours A and B are for Clarinet and Saxophone.
With type A you will measure at the vamp, whereas type B is for measuring
at the flat inside of the reed.

- The Reeds 'n Stuff transport case features a simple design that's easy to use. The foam interior allows a safe transport and provides a snug fit. Other tools can be stored in the zipper closed compartment on top of the case. The handle gives portability wherever you need it.
  Buy

Why is the hardness tester so important?

Should the cane be measured dry or soaked?

In what stage should the cane be measured for hardness?

Are the measuring results for pregouged cane the same as for gouged cane?

If the material is thicker, the measurement results will be higher.

What are the usual measuring results?

Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).

Are there different measurement results for the hardness testers?

Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.

Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?

Can the hardness tester be used as a dial indicator?

What is the difference between the analog and digital hardness tester? Which one is more accurate?

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Do not touch the new battery with your fingers, use a piece of cloth. The battery compartment is located on the upper left side of the dial gauge. Use a small screwdriver or the tip of a sharp knife to lift off the small plastic cover. Insert the new battery exactly as you found the old one. When inserting the new battery be careful not to touch, bend, or break the battery contacts (the small pieces of metal inside the dial gauge).
You can find detailed instructions here.

Reeds 'n Stuff/Clarinet/Measuring & Testing products

Diameter Gauge 22–32 48.04 €

Size it up

Radius Dial Indicator 200.87 €

Precision right from the start

Radius Dial Indicator 276.13 €

Precision right from the start

Caliper DIGITAL 71.28 €

Compact Caliper 17.85 €

Pocket Caliper 18.90 €

Compact Caliper DIGITAL 12.28 €

Compact Caliper DIGITAL 23.50 €

Arbour 68.43 €

Analog Measuring Device 424.90 €

Control and Quality

FAQ

Digital Measuring Device 514.01 €

Control and Quality

FAQ

Analog Hardness Tester 499.80 €

Quality over Quantity

FAQ

Digital Hardness Tester 583.10 €

Quality over Quantity

FAQ