Reeds 'n Stuff/Reedolino/Reedmaking with Yumi Deger 商品

Reed Making Set YUMI 〜 1,622.12 €

Tue, 18 Jun 2024 13:00:41 +0200

Yumi Deger

さらに詳しく

メーキングマシーン〜 1,773.10 €

Tue, 03 Mar 2026 23:10:15 +0100

Easy and Efficient

The tip profiling machine is the most efficient machine
for creating the profile in the front half of the reed.

This machine allows you to precisely produce a symmetrical and playable reed,
using our many available templates.

Built of high-quality anodized aluminum and a special german steel,
the tip profiling machine is built to last for many years.
Linear ball bearings provide a comfortable user experience.

新しい360°バケットを装着

何年もの開発を経て、Reeds 'n StuffはBlade 360°を誇らしげに提供します。ブレードが鈍くなったら、次の鋭い部分に回転させて、プロファイリングを続けるだけです。この操作は少なくとも6回行うことができ、交換用のブレードが必要になる前に、多くのリードをプロファイリングできます。
ブレードを固定しているネジは、底面から簡単にアクセスできるため、一度ブレードホルダーの高さを設定すれば、後は調整不要です。ネジを緩めてブレードを回転させ、再びネジを締めるだけでOKです。数秒で作業を再開でき、ブレード全体を交換する必要がありません。

Prepared for Transport

Prepare your tip profiler for transport.

Insert the mandrel into the designated hole on the left side, screw the wooden handle into the threaded hole on the right side, and lock the carriage into place with the transport locking screw on the left side of the machine.

Transport Bag Included

The Reeds 'n Stuff transport case features a simple design that's easy to use.
The foam interior allows for safe transport and provides a snug fit. The tools to adjust the machine can be stored in the zipper compartment on top of the case. The handle provides portability wherever you need it.

購入

60日間テンプレートお試しできます

自分に合う型を見つけてください。

お試しはどのように行う?

テンプレートのリスト

ストレート・シェーパー　R1A 220.15 €

Thu, 05 Mar 2026 13:21:17 +0100

Durable & Precise

Our Straight Shapers are made from carefully selected materials and finely finished. Through a hardness treatment tailored to their size and intended use, they offer high shape stability, precision, and durability. This ensures comfortable and controlled operation, consistently delivering precise results.

The pair of engraved lines on the sides mark the narrowest point of the shape and are an important tool for precise shaping. For optimal shape transfer, shape from both sides towards this narrowest point.

The outermost lines are to help center shorter cane (118 mm for bassoon, 148 mm for contrabassoon).

Thanks to the silicone tips, both gouged and profiled cane can be shaped.
The silicone tips secure the thinner parts of the profiled cane in the center and prevent the cane from slipping.

The silicone tips can be removed and replaced as desired, especially when shaping unprofiled cane.

Variety of Shapes

Our range of handheld pattern cutters impresses with an extraordinary variety of shapes. From classic profiles to custom special shapes, the different contours and designs provide precise results and maximum creative freedom.

View all handheld pattern cutters

テンプレート　型　#GR5 464.10 €

Thu, 05 Mar 2026 13:22:53 +0100

For players who prefer a more soloistic sound and a continuous airflow.

Perfect with harder cane and thinner profile.

Here is a table of setup measurements to help reset your tip profiling machine
or set up a new template.

ダイヤモンドやすり 37.14 €

Fri, 27 Feb 2026 13:03:07 +0100

リードナイフ 100.51 €

Tue, 03 Mar 2026 07:03:53 +0100

For precise cuts

Reedmaking knife with interchangable razor blade for precise cutting. A razor-sharp acute angel blade that integrates premium steel, Japanese-style tempering, and multi-step sharpening to produce an exceptionally smooth and fine quality of cut.
A leather sheath and a set of 10 extra razor blades are included.

For your Safety

Your reed making knife is delivered with a leather sheath.

硬度計　デジタル 583.10 €

Thu, 05 Mar 2026 13:22:54 +0100

正確で客感的

リードの品質は色々な要素で異なります。

リード材の品質で大きく左右されます。
見た目だけでは判断できません。

リード材の内側が肝心です。
硬度計が客感的な数値を測定出来ます。。

リードのレベルアップと時間の節約につながります。

硬度計はアナログとデジタルから選べます。
精度は同じく、使い勝手に関してはデジタルがより簡単です

- この持ち運び用バックに収納すれば
  精密な硬度計も安全に
  持ち運ぶことができます。
  サイドのチャックを開ければ
  必要な道具も収納することができます。
  購入

Why is the hardness tester so important?

First of all, the time saved in selecting suitable canes for you offers a great advantage. You save valuable working time that you would otherwise spend gouging, shaping, tying on and scraping canes that would not have given you a suitable result anyway. More important, however, is the fact that you can increase the quality of your reed making and get more reliable results.

Should the cane be measured dry or soaked?

It should be noted that only sufficiently dried cane will give useful results. It is not advisable to use soaked cane. It is best to note the test results on the cane and later on the staple. This will give you an overview of what works well for you personally.

In what stage should the cane be measured for hardness?

It is best to use the hardness tester after pregouging if you have a pregouging machine. The basic requirement is a smooth surface and a consistent thickness. If you use the small pregouger instead of a machine, you should test the cane after gouging.

Are the measuring results for pregouged cane the same as for gouged cane?

If the material is thicker, the measurement results will be higher.

What are the usual measuring results?

Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).

Are there different measurement results for the hardness testers?

Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.

Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?

Yes, the hardness testers have each been set up for a specific instrument. The heights of the support plate differ. The so-called arbour, on which the cane lies, is available individually, allowing you to convert your machine for other instruments.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured in any case. Also with gouged cane inaccurate measurement results may occur. For this reasons we do not recommend to double the hardness tester as a dial indicator.

What is the difference between the analog and digital hardness tester? Which one is more accurate?

Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analogue hardness tester, the dial has to be turned. The precision of both devices is the same. If required, you can connect the digital hardness tester to your computer to create personal statistics.

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Do not touch the new battery with your fingers, use a piece of cloth. The battery compartment is located on the upper left side of the dial gauge. Use a small screwdriver or the tip of a sharp knife to lift off the small plastic cover. Insert the new battery exactly as you found the old one. When inserting the new battery be careful not to touch, bend, or break the battery contacts (the small pieces of metal inside the dial gauge).
You can find detailed instructions here.

キャリパー　アナログ 261.80 €

Wed, 21 Jan 2026 12:45:12 +0100

品質と管理

Reeds 'n Stuff のダイヤルゲージは、精度、耐久性、信頼性に優れています。

ケーンの厚さを測定することで、常に良好な結果を得ることができます。
舌部分の目盛りにより、リード間で同一の測定ポイントを特定でき、プロファイルと対称性を確認することができます。

ダイヤルとリフティングレバーは、任意の位置に回転させることができます。
そのため、このダイヤルゲージは右利きの方にも左利きの方にも適しています。

当社のダイヤルゲージは、アナログとデジタルの両方の形式でご利用いただけます。
どちらの装置も精度は同じで、違いは使い勝手の良さにあります。

New

カーブ形状

新しく設計された舌部はわずかにカーブしています。
これにより、チューブ全体にわたって正確な測定結果が得られます。

New

高精度

舌先の新しい側面形状は前方に向かって細くなっており、チューブの側面でのピンポイント測定を可能にします。

アップグレード用

新しい舌部は単品でもご購入いただけますので、お使いのダイヤルゲージに取り付けることができます。

購入

Swap It Out

Learn how to do so on the Support page.

先端部分をお選び下さい

先端部分 S, F, D は様々な角度から一つのポイントを計測するのに適しています。
球状になっている先端部分 K はリードやケーンをスライドさせても、
傷つける危険性がありません。

この持ち運び用バックに収納すれば
精密なキャリパーも安全に
持ち運ぶことができます。
サイドのチャックを開ければ
必要な道具も収納することができます。

購入

How can I set the dial indicator to ZERO?

The easiest way is to turn the dial so that the large pointer is back at ZERO. However, the dial indicator can also be recalibrated so that the large pointer is back at 12 o'clock. To do this, loosen the fastening screw that fixes the dial indicator in the dial indicator arm. Now position the dial indicator by moving it up or down so that both the small and large pointer show ZERO. When locking the screw do not tighten it too much, this can block the axle movement in the dial indicator.

Can I change the tip of the dial indicator?

Replacing the tip of the dial indicator is easy to do. You can simply turn out the tip that you have now with the help of pliers and replace it with the desired new tip. If there is not enough space between the tongue and the tip, you can loosen the screw that fixes the dial gauge in the dial gauge arm and remove the dial gauge from the arm. It may now be necessary to recalibrate the dial indicator.

Can I change the tongue of the dial indicator?

The tongue of the dial gauge can also be changed very easily. You can find instructions here.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured with the hardness tester. Inaccurate measurement results may occur also with gouged cane. For this reasons we do not recommend using the hardness tester as a dial indicator.

Can I transform my dial indicator from right to left-handed or do I need to buy a new one?

The dial indicator can easily be transformed from right to left-handed. Simply loosen the set screw at the end of the arm holding the dial. This will allow you to rotate the dial to face the opposite direction. Be sure to calibrate the height of the dial so it both touches the tongue and reads "0" before tightening the set screw. Make sure not over-tighten this screw as it will damage the actuating shaft and prevent the dial from operating properly.

カッターナイフ 9.42 €

Thu, 05 Mar 2026 13:21:13 +0100

リード製作用

Extra Razor Blades 4.08 €

Thu, 05 Mar 2026 13:21:13 +0100

for Utility Knife

真鍮ワイヤー〜 45.91 €

Mon, 23 Feb 2026 20:25:56 +0100

Wrap it tight

Our German brass wire gives your reeds the support they need. Available in two thicknesses, on 50 g spools, in 1 kg loops, or cut to length, as well as in two hardnesses. The Standard hardness is the wire we have always stocked. To accomodate the requests of some of our customers we now also stock wire which is somewhat softer but still provides the necessary structure.

Our packages of cut-to-length wire contain 1000 pieces of wire, cut to 80 mm, ready to use.

Note: for Americans who are accustomed to purchasing wire measured in gauge, 22-gauge wire is 0.64 mm thick. You will likely find the 0.6 mm wire to be more to your liking.

乾燥スタンド　BASE 19.10 €

Thu, 26 Feb 2026 11:40:57 +0100

最初から形作られたリード

リードを成形用マンドレルの上で乾燥させることで、内側に望ましい形状が付き、またプライヤーでリードのウエストを整える手間も軽減されます。

木製プレート付きの乾燥ボードは、当社のすべての交換可能なオーボエおよびファゴット用マンドレルに対応しています。巧妙な設計により、マンドレルは安定性を損なうことなく、いつでも交換可能です。最大限の柔軟性を実現するために、ベースプレートとマンドレルは別々に注文でき、自分だけのカスタム組み合わせを作ることができます。木製プレートは、固定ポイントの有無にかかわらずご利用いただけ、作業台に安全に取り付けることができます。

NOTE

This item contains only the wooden base plate and is not compatible with our Drying Pin for bassoon. All mandrels labelled as "interchangeable" will fit in this drying board base.

Reeds 'n Stuff/Reedolino/Reedmaking with Yumi Deger 商品

Reed Making Set YUMI 〜 1,622.12 €

Yumi Deger

メーキングマシーン〜 1,773.10 €

Easy and Efficient

新しい360°バケットを装着

Prepared for Transport

Transport Bag Included

60日間テンプレートお試しできます

ストレート・シェーパー　R1A 220.15 €

Durable & Precise

Variety of Shapes

テンプレート　型　#GR5 464.10 €

ダイヤモンドやすり 37.14 €

リードナイフ 100.51 €

For precise cuts

For your Safety

硬度計　デジタル 583.10 €

正確で客感的

FAQ

キャリパー　アナログ 261.80 €

品質と管理

カーブ形状

高精度

アップグレード用

Swap It Out

先端部分をお選び下さい

FAQ

カッターナイフ 9.42 €

Extra Razor Blades 4.08 €

真鍮ワイヤー〜 45.91 €

Wrap it tight

乾燥スタンド　BASE 19.10 €

最初から形作られたリード

NOTE

Reeds 'n Stuff/Reedolino/Reedmaking with Yumi Deger 商品

Reed Making Set YUMI 〜 1,622.12 €

Yumi Deger

メーキングマシーン 〜 1,773.10 €

Easy and Efficient

新しい360°バケットを装着

Prepared for Transport

Transport Bag Included

60日間テンプレートお試しできます

ストレート・シェーパー R1A 220.15 €

Durable & Precise

Variety of Shapes

テンプレート 型 #GR5 464.10 €

ダイヤモンドやすり 37.14 €

リードナイフ 100.51 €

For precise cuts

For your Safety

硬度計 デジタル 583.10 €

正確で客感的

FAQ

キャリパー アナログ 261.80 €

品質と管理

カーブ形状

高精度

アップグレード用

Swap It Out

先端部分をお選び下さい

FAQ

カッターナイフ 9.42 €

Extra Razor Blades 4.08 €

真鍮ワイヤー 〜 45.91 €

Wrap it tight

乾燥スタンド BASE 19.10 €

最初から形作られたリード

NOTE

メーキングマシーン〜 1,773.10 €

ストレート・シェーパー　R1A 220.15 €

テンプレート　型　#GR5 464.10 €

硬度計　デジタル 583.10 €

キャリパー　アナログ 261.80 €

真鍮ワイヤー〜 45.91 €

乾燥スタンド　BASE 19.10 €